Characteristics of polycarbonate greenhouse Harvest PC

The depth of the material is 4 mm.

If you want, you are able to raise the duration of the construction to 6 metres or more. To try it, it’s enough to attach a two-meter expansion. When picking a drawing, then look closely at the space between the arches. This figure should be 65 cm, and that’s the most appropriate duration for the specified depth of the substance. The diameter of the doorways in line with the maker’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to pick a location for its location. If this is done properly, it is possible to provide yourself with a crop of fresh veggies for the whole calendar year.

The place for the future greenhouse is marked instantly in the planning of this garden plot. To be able to melt the snow in the location of their greenhouse as early as possible, the ideal point on the website is going to be a small elevation. In addition, in such a place won’t need to worry about significant humidity as dirt and atmosphere inside the structure.

Assemble a polycarbonate greenhouse on an elevated site – intends to take care of the best temperature inside.

If it is not feasible to put a greenhouse on an elevated place, you will need to pour a layer of fine shattered rock about 20 cm and the identical layer of fertile land to make seedbeds.

Before assembling a greenhouse on your garden plot, you should also think about where and how this construction is going to be set up. First, you have to pick a location for this. The greenhouse ought to be found in a metropolitan region at least a few meters away from houses, barns and other structures.

The best way to install a greenhouse in Line with the sides of the Planet

Be sure to level the dirt surface – it’s ideal to even remove the top layer. This can also eliminate weed seeds. And for simplicity of work, eliminate the soil in a place that is around a meter wider on each side of the rectangle that you desire.

It’s also worth considering using a foundation. As producers say, today most greenhouses do not need that, particularly if they (greenhouses) are utilized only in the summer and spring period. However, experienced gardeners still suggest earning a basic basis from a pub. It’s quite simple – it’s enough to associate with each other using metal corners and screws four parts of wood using a cross-section of 10 * 10 cm. The size of such a foundation should be equivalent to the base of their future greenhouse.

Simple bar foundation

You may also gidpostroy.ru produce a strip base of concrete. He’s more dependable than a pub base, but demands more financial and labour costs. By the way, the rainwater, which will be utilised in the winter, with no and do not do without it at all.

Stages of the formation of a strip base: a schematic representation

Many producers counsel to install greenhouse structures without even building a base. For this use, they equip the frame with special T-shaped legs, so that the structure was securely fixed. However, as practice shows, it is still necessary to construct a foundation: so and the basis will be more rigorously fixed and also the components of the foundation that are in touch with the soil, will be saved much more in its initial state.

The principal thing is to see to the material with special agents to protect the timber from moisture. The substance is usually installed on concrete blocks that are dug into the soil. For a six-meter structure, they need 10 pieces: four on either side and one in the center of the ends.

Before you perform the greenhouse , you need to choose the best spot for it. It has to be an even website, so the framework was found evenly, without distortions. It needs to be sunny and never obscured by trees or buildings.